Quality Subracks

Maximize the performance of your components

No matter what industry you’re in, protecting your equipment is of the utmost importance.

Often, this equipment needs to operate in harsh environments where it is subjected to heat, moisture, severe vibrations, and other elements that might interfere with your components’ performance or even damage them.

However, by adding a subrack to your system, you can maximize the performance of your equipment and protect it from damage, all while keeping your system organized.


Subracks enclose your units in a case of sturdy sheet metal, blocking things like dust and moisture. They can be attached to a wall using rugged metal rails.

For more taxing environments, such as railways or military usage, many subracks are rated for vibrations up to 25g according to all applicable manufacturing standards.

Many subracks may even be upgraded with EMC shielding, offering protection against dangerous electromagnetic interference that can interfere with readings and even completely destroy your units.


When using multiple components at a time, it can be difficult to keep things organized.

A subrack allows you to keep your equipment in one convenient place. It keeps your cables and wires out of site, eliminating the risk of them being damaged or tripping workers.

Customize To Your Needs

A standard subrack kit can allow you to add multiple components as you have need of it. However, you can also customize a unit from the ground up. Mix and match different units to fit as many components as you need in as many configurations as you need.

The flexibility of subracks also gives you room to add new equipment as your system grows and adapts.


You can configure your subrack on this page to build a subrack system perfectly suited for your needs. If you need help, consult the Configurator FAQ page.

How to cool small form factor electronics?

How to cool small form factor electronics?

Systems are getting smaller and CPU are always more powerful!

When the processing capabilities of a system increase, the power consumption increases too. Therefore it increase the amount of heat produced. That’s why sensitive electronics require adequate cooling to keep a consistent operation. 

Fanless cooling could be an option for a many reasons including a better iP protection, the ability to shield sensitive electronics from air contaminants, reduced noise of operation, and a better reliability.

Unfortunately, the performance of conduction cooling is limited. Engineers requiring fanless cooling have had 2 options,  opt for a very expensive liquid cooling or heat pipe solutions, or they can limit the performance of their boards.

schematic cooling system

This whitepaper will explain the factors that limit conduction cooling performance, introduce manufacterers innovative conduction cooling products, and finally to review the performance of the various solutions presented.

Click here to download the white paper from Schroff.


How to configure an electronics or server cabinet?


cabinets configurator from SchroffMost people these days are very comfortable using electronics for virtually everything they do. Consider your car, house, and Smartphone: the majority of us cannot live without our electronic gadgets. Thus if everything we use seem like electronics, then why not an electronics cabinet?

Electronics cabinet offers a standardized rack, enclosure or frame for mounting various types of electronic equipment.It offers protection against dust, unauthorized access, water, vibration and overheating among many others.

Why server cabinet 3D configurator?

3D Cabinets and Frontpanel Configurators helps to create racks, cabinets, socket strips etc to suit your specific needs. It gives you an endless opportunity to choose your choice of colors, frames, dimensions, ventilation, doors, cabling, network functions and more, depending on your choice of electronics cabinet. You can as well configure the number of slots, backplane topology, AMC module sizes, rear input/output, power feed, bus specifications, cooling, mounting position and many more. Furthermore, 3D Configurator offers a wide range of networking, colocation and server cabinet options, as well as thermal management aisle containment solutions.

Our group of specialists will enable you to arrange and tweak electronic bureau per your necessities in light of strong cabinet stages that are tried and guaranteed to driving standards of industries. There are various arrangements of gadgets and server cupboards to meet anyone’s particular needs and requirements.

3D Configurator gives the biggest assortment of steel and aluminum rack cupboards and cabinets for mounting your electronic hardware. The majority of the mounting arrangements to make board or other segment’s mounting are basic and helpful. Every one of the cabinet are intended for simple establishment and augmented wind stream. 3D Configurator likewise gives custom alterations to any hardware and electronic cabinet to enable you to build up a turn-key framework for much faster establishment.

For different IT server farms and companies, there are many different systems administration, colocation and server cabinet alternatives, and also warm administration passageway control arrangements can be made. So many attractive designs as well as high-end ruggedized options for seismic and military applications that can also provide EMC shielding, are on the line.

But if you are looking for a DYS solution to build your 19″ racks you can also check this out.

19" rack

Some Electronics and Data Applications

Why a good electronics or IT manufacturers are important?

Electronics cabinets

The need for proper electronic cabinets that provide the most reliable level of protection is huge. The aluminin cabinets are created with attractive designs that are perfect for any kind of electronic equipment to be mounted on them for highly efficient use. We pride ourselves in the highly reliable, durable and powerful products that we have available for purchase and you can be sure that your electronics will be safe and secure when you use any of our cabinet models.

You can also fully customize and modify the cabinets.

Server Cabinet

Server racks need to be solid and easy to access in order to be able to handle the requirements of a proper server maintenance process. This is the reason why many manufacturers provide the most reliable server cabinet structures. Their materials are extremely durable and they have been built for maximum accessibility in order to ensure the most reliable results possible.

The proper maintenance of services is going to be made much easier when you have the right kind of cabinets to get things done efficiently. You will have plenty of access to wiring in your stacks and they can be kept clean without hassles.

Data Center Infrastructure

The process of coming up with the right kind of setup for your data center infrastructure is not one that can be taken lightly. There are many configurations that need to be considered if you want to get the most reliable flow of work when giving maintenance t your data center.

Manufacturers mostly provide the required solutions that are going to ensure the most reliable and efficient structure that you can set up for your equipment. This way you will be able to optimize your energy consumption and also get the most efficient structure available.

Printed Circuit Board

The importance of a high quality printed circuit board is huge when it comes to the proper support of electronic components that need to perform flawlessly and in perfect synergy in order to provide the most reliable results. The conductive tracks are perfectly designed in order to ensure that the results are going to be ideal for your needs.

Many manufacturers design the card dimensions based on the specific needs of each customer and this is the reason why they are leading providers of high quality printed circuit boards. You can browse around and find the best and most durable designs that will boost performance on your electronics.